Maximum(A+B)*2 | 3000mm | The minimum length A | 250mm |
Minimum(A+B)*2 | 900mm | The maximum height D | 1150mm |
Maximum(C+D+C) | 1200mm | The minimum height D | 250mm |
Minimum(C+D+C) | 350mm | Nail tongue width E | 35-40mm |
The minimum roll cove C | 25mm | Mechanical length | 19000mm |
The biggest shake cove C | 560mm | Machine width | 4450mm |
The maximum width B | 1320mm | Machine weight(T) | 25 |
the minimum width B | 200mm | Speed(nail/min) | 800 |
The biggest length | 1320mm | order | 1-99 |
Nail distance | 30-80 | Nailing speed | 120m/min |
Sticky box speed | 200m/min | Power(KW) | 60 |
The function and characteristic
1. The machine full computer control automatic tuning single, easy to operate, simple; can store 1000 nail single.
2.Screw mixer bottomless with cover box can also be (when ordering).
3.3-5 minutes to adjust size, simple and quick.
4.Nail head power for the servo motor, mechanical speed: 800 nail/minute.
5.Pieces paper department adopts the vacuum adsorption front belt paper make sure the carton is not skewed; The machine front feeder belts, belt height can be adjusted separately, increase service life.
6.Pieces into the paper with side lapping device can send paper neatly smooth.
7.Mixer feeding, feeding speed by PLC automatic control, guarantee won’t appear the cartons nail not to come out or bad phenomenon.
8.Mixer feeding machine adopt servo motor control, to ensure that the nail from the stable and accurate.
9.This machine design have box plastic function, ensure no scissors in nailing, neatly not skew; Before and after the machine to ensure the scissors mouth can’t more than plus or minus 2mm.
10.In pieces the machine can be nailed three layer , five layer carton(statement in advance with order) is required for a seven layers.
11.An automatic counting stacking quantitative output in pieces the machine finally.
12.Pieces of native baling part for matching.
The paper feeder
Paper feeding part adopts frequency conversion timing belt, vacuum adsorption front, equipped with side flapping device, ensure that the feed is not skew.
The folder part
The folding characteristics is mounted with creasing wheel, carries on second time of creasing. This makes the folding of the carton more beautiful. This machine before stitching box in the folded part have a shaping device, folding the carton before stitching, ensure there is no scissors difference.
The correction device
The correcting section adopts the servo motor to correction , then synchronous belt transport the box into stitching section, ensure no scissors difference.
The stitching box part
Stitching head adopts special materials, durable and not easy to damage speeds up to 800/1000 nails per minute, the machine features is that the head adopt servo motor direct drive, speed is stable and accurate. Can do single nail, double nails, head and tail stitch, strengthening the middle stick operation. A nail line using 2 spools 20 kilograms of automatic wire feeding, reduce the time for changing wire spool.
Nail head parameter:
Nail head speed | 800 nail/min |
The minimum thickness of the board | 4mm |
The maximum thickness of the board | 12mm |
U nail internal width | 12mm |
Flat wire specifications | 17#(2.0 x 0.75) |
Nail box inclination | 45 |
The minimum distance of nailing | 30mm |
The motor power | 12kw |
The counting stacking section
Setting via computer, automatic counting, automatic calibration, automatic delivery.
Stacking parameter:
The minimum stack width | 300mm |
The maximum stack width | 1500mm |
The minimum stack length | 300mm |
The maximum stack length | 1500mm |
speed | 200m/min |
Packaging & Delivery
Packaging Details:
We usually packed this machine covered by plastic film.
Delivery Detail:
Within 30 days after we got the deposit.
Copyright © Shandong Rino International Group All Rights Reserved. | Sitemap | Powered by 
